Historie hledání
QUINTON HAZELL měch, hnací hřídel QJB2000 Ean: 5016593177567
- Kód výrobce: QJB2000
- Objednací kód: 00057-QJB2000
- Název: Měch, hnací hřídel
- Ean: 5016593177567
Fitting Instruction 1 Remove the road wheel and hub. Remove the old boot and clips. Clean any grease or debris from the shaft and joint . 2 Check fitting cone for sharp or rough areas. Smooth with emery cloth if necessary. Spray outer with cone spray. 3 If fitting the new boot to an outer CV joint, turn the boo t inside out. (this will almost always be the case) Spray the inside with cone spray. 4 Place the large end of the boot over the narrow end of the cone. Place the large end of the cone over the joint. 5 Push the boot forcefully until it is lear of the cone. 6 Remove the cone and turn the boot right side out - if necessary. 7 Snip the corner of the grease sachet and fill the joint. Slide and stretch the boot into position over the joint. 8 Secure the boot with fixing clips, removing any excess with tin snips. Replace the hub and road wheel.
Vnitřní průměr 2 [mm]: 90 mm
Vnitřní průměr 1 [mm]: 22 mm
vyska ( v mm ): 120 mm
montovací strana: strana kola
Konkurence
Referenční
- AUGROS: 5543750Q